The Guestbook Dj

18/09/2026

Tech stuff about new speaker cables & wireless mic cables ( yes I know there wireless mics but still require a cable from transmitter too desk )

Van Damme Balanced Microphone Lead Neutrik Female to Male XLR Patch Neutrik 10 Colours

Genuine Cable, Genuine Connectors

This cable is UPOFC - Ultra Pure Oxygen Free Copper

Better sound due to pure copper and silver plating.

Made with 4 percent lead free silver solder.

Professionally handmade by us with over 30 years of soldering experience
What our customers have said about this cable 'Improved sound quality' 'Great sound, clearer more defined and detailed' 'I could not believe the sound would improve in this way'
What this cable can be used for:
Microphone to mixing desk
Mixer to Active speakers (also known as powered loudspeaker) (If you need a cable for Passive speakers contact us)
Patch audio equipment FX unit, FX processor, EQ, CD player, compressor, limiter and so on that have a 3 pole XLRs.
This cable is balanced. All XLR outputs/inputs are balanced, this is a design that reduces induced noise caused by radio frequencies and electro mechanical interference, this is present around us all.
Choose your cable colour from the drop-down menus - what you see in the picture shows the cable colour you will receive with the XLR connectors.
We have sold over 12000 of these microphone leads, all handmade to order.
Check out our other listings - More cables - many more choices.
Black Brown Red Orange Yellow Green Blue Purple Grey White
Choose your length of cable

We make this lead for you...
Handmade to order Made with Van Damme Tour Grade Classic XKE Microphone Cable and Neutrik Nickel 3 pole XLR's NC3MXX male & NC3FXX female XLR connectors. This listing is for one microphone/patch lead. Made by us in our workshop using our advanced solder equipment with 4 percent silver solder which gives a bright, shiny finish. The solder is lead free

18/09/2026

Some tech stuff about new cables because without great quality cables not so great quality sounds between controller to mixer for better EQ

Female XLR Cable to mono TS 1/4" 6.35 mm Jack unbalanced

Used with unbalanced Jack inputs.

Ultra Pure Oxygen Free Copper Cable

High quality cable and will last years. Superior sound, brighter and precise.

We use 4 percent silver solder for a harder shiny finish that will give even better sound quality. We have over 30 years experience within the pro audio industry.

Typical applications for this lead:

Mixer to amplifier inputs
Dynamic microphone to mixer input
Output of a piece of audio equipment to mixer input channel
Can be used for any mic/line level use

We make this lead order with Neutrik industry standard connectors and high quality unbalanced Van Damme UPOFC screened black cable for noise free signal transmission, The combination of both brands give you the best in quality and sound performance.

Connections are made on:

Pin 2 XLR - Tip Jack
Pin 1 3 XLR linked unbalanced configuration - Sleeve Jack

This is for a single lead

Application notes

Low noise and high flexibility for on stage use etc
Dual thermoplastic/lapped copper screens for excellent noise rejection
Ultra pure oxygen free copper for outstanding sonic integrity

Mechanical Specification
Conductors 3 x 0.20 mm silver plated ultra-pure oxygen-free copper
4 x 0.20 mm bare ultra-pure oxygen-free copper
Conductor size 7 x 0.20 mm, 0.22 mm2, AWG 24/7
Insulation Foamed polyethylene
Screen 1 0.40 mm conductive thermoplastic
Screen 2 80 x 0.10 mm close lap spiral bare oxygen-free copper
Jacket material Flexible PVC/Neoprene composite
Overall diameter 6.00 ± 0.15 mm
Bend radius 10 x overall diameter
Operating temperature -20 to +70 ⁰C

Electrical Specification
Resistance Conductor < 90 Ohm/km
Insulation > 5000 MOhm/km
Capacitance Core to screen 90 pF/m

11/09/2026

Loving the new promotional materials

Soon to be at some autumn wedding fayres near you, watch this space for upcoming fayres

Roller banner ✅
Car graphics ✅
Laptop cover✅ok not perfectly straight🤣
Business cards ✅

11/09/2026

Look out for the guestbook Dj car on my travels too another fab event, or maybe to your next event 🥂🥂

08/09/2026

Yes another awesome evening at the weekend and a huge congratulations to the new Mr & Mrs Watson

And a huge thanks too Steve who also did a bit of a Dj set on behalf of the bride & grooms best friend he was brill 👍👍

The room looked stunning - also on hire was one of my stunning Ivory audio guest books so all the family & friends can leave voice messages for the wonderful couple
They will soon receive there usb full of messages & a nice bottle of bubbly

30/08/2026

Looking for favor ideas ??

💍🌿 NEW FROM SERENITYSTITCH — PERSONALISED CROCHET WEDDING FAVOURS 🌿💍

I’ve been working on something rather special… and I absolutely love how these have turned out. 🤍

Introducing my new handmade crochet flower wedding favours.

Each little flower is individually crocheted by me and presented on a beautiful personalised card featuring the happy couple’s:

🤍 Names
🤍 Wedding date
🤍 Personal thank-you message

But here’s my favourite part…

🌸 Your flower doesn’t have to be a rose!

I can create many different varieties of crochet flowers, so we can design your favours around the main flower in your bridal bouquet.

Roses, daisies, sunflowers, forget-me-nots, lavender and more — and colours can be chosen to complement your wedding colour scheme. 🌹🌼🌻🪻

Imagine your guests arriving at their place setting to find a tiny handmade version of your wedding flower waiting for them. 🥹

It’s not just a favour they’ll take home…

It’s a little piece of your wedding day they can keep. 🤍

Each favour can be individually packaged and is perfect for place settings, wedding tables or guest gift bags.

✨ Handmade in Dundee
✨ Personalised especially for your wedding
✨ Flowers & colours made to complement your bouquet
✨ Couple’s names and wedding date included
✨ Beautiful keepsake for your guests

Prices from £4.50 each
🤍 Discounts available for larger wedding orders
🌸 Bespoke designs quoted individually

If you’re planning a wedding — or know somebody who is — please tag them below! 💍

I’d also love to work with a few brides-to-be to create some different sample flowers, so if you have a particular wedding flower in mind, send me a message and let’s see what we can create. 🌿🤍

SerenityStitch
Handmade with love in Dundee 🧶